SKAPS GT-140, 4 oz NonWoven Geotextile Fabric, 600 SY Roll
SKAPS
$625.22
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 3 - 6 and pay only $504.60 each
- Buy 7 or above and pay only $469.80 each
(No reviews yet)
Write a Review
SKAPS
SKAPS GT-140, 4 oz NonWoven Geotextile Fabric, 600 SY Roll
SKAPS GT-140, 4 oz NonWoven Geotextile Fabric - 15' x 360' (600 SY Roll)
SKAPS GT-140, 4 oz NonWoven Geotextile Fabric is a needle-punched NonWoven Geotextile made of 100% virgin polyproylene staple fibers, which are formed into a random network for dimensional stability. SKAPS GT-140, 4 oz NonWoven Geotextile Fabric resists ultraviolet deterioration, rotting, biological degradation, naturally encountered alkalis and acids. Polypropylene is stable within the pH range of 2 to 13. SKAPS GT-140, 4 oz NonWoven Geotextile Fabric is NTPEP certified and meets requirements as per AASHTO Standards and/or DOT Standards.
SKAPS GT-140, 4 oz NonWoven Geotextile Fabric is a Louisiana DOT Approved Class A and Class B material and is listed as such on the LA DOTD QPL. Class A and Class B geotextile fabric is specified in the Louisiana Standard Specifications for Roads and Bridges (2006) for Drainage, to include; Underdrains, Pipe and Precast Manhole Joints, Weep Holes, Bedding Fabric, Approach Slabs, Fabric for Geocomposite Drainage Systems.
SKAPS GT-140, 4 oz NonWoven Geotextile Fabric is available in the following roll configurations:
12.5' x 360' (500 SY) or 15' x 360' (600 SY)
PRICING NOTE: Please note, geotextile fabric pricing is extremely volatile at the moment. Be advised, we will do all we can to honor advertised pricing, however, pricing is subject to change without notice. Availability is also very unstable right now, so if possible, we may switch to another brand of fabric of equal or greater specifications.
SKAPS GT-140, 4 oz NonWoven Geotextile Fabric conforms to the Minimum Average Roll Values (MARV) listed below:
|
PROPERTY |
TEST METHOD |
ENGLISH (MARV2) |
METRIC (MARV2) |
|
Grab Tensile Strength |
ASTM D 4632 |
100 lbs. |
0.445 kN |
|
Grab Elongation |
ASTM D 4632 |
50% |
50% |
|
Trapezoid Tear Strength |
ASTM D 4533 |
45 lbs. |
0.2 kN |
|
CBR Puncture Resistance |
ASTM D 6241 |
300 lbs |
1.334 kN |
|
Permittivity4 |
ASTM D 4491 |
2.0 sec-1 |
2.0 sec-1 |
|
Water Flow4 |
ASTM D 4491 |
140 gpm/ft2 |
5689 l/min/m2 |
|
Apparent Opening Size (AOS)3&4 |
ASTM D 4751 |
70 Std. U.S. Sieve |
0.212 mm |
|
UV Resistance |
ASTM D 4355 |
70%/500 hrs. |
70%/500 hrs. |
SKAPS GT-140, 4 oz NonWoven Geotextile Fabric Packaging Information:
|
Roll Dimensions (W x L) |
15 x 360 ft. |
4.6 m x 109.8 m |
|
Area Per Roll |
600 sq. yards |
505.1 sq. meters |
|
Estimated Roll Weight |
172 lbs. (600 SY) |
78 kg (600 SY) |
NOTES:
- The property values listed above are subject to change without notice.
- Minimum Average Roll Values (MARV) is calculated as the average minus two standard deviations. Statistically, it yields approximately 97.5% degree of confidence that any samples taken from quality assurance testing will meet or exceed the values described above.
- Maximum Average Roll Value (MaxARV)
- At time of manufacturing. Handling may change these properties.
This information is provided for reference purposes only and is not intended as a warranty or guarantee. SKAPS and Southern Geo Supply, LLC assume no liability in connection with the use of this information.
SKAPS non-woven geotextiles are needle-punched to provide excellent strength and hydraulic characteristics necessary for ground stabilization, drainage, and erosion control applications. Needle-punched non-woven is manufactured by mechanically orienting and interlocking polypropylene fibers of a carded web. With the combination of drafting and heat, non-woven needle-punched fabrics deliver high strength products with relatively high elongations that offer high survivability when implemented within a transportation engineered design.
